FTIR accessory: PA101S
Sensitivity and low volume
The PA101 measures low concentrations from very low gas volumes. High sensitivity is obtained by utilizing the patented cantilever based optical microphone technology.
Linearity
The photoacoustic signal, unlike the conventional infrared detector output, is highly linear in a very wide dynamic range because new photoacoustic technology allows the use of short absorption path length without losing sensitivity. Wide linearity range allows the efficient subtraction of unwanted signals, such as water. Generally water vapor occurs in much higher amounts in gas mixtures than the analyte gas and it is usually very difficult to subtract using conventional detection.
Reliable concentration monitoring
Absorption is measured directly with photoacoustic technique. This makes the measurement free of drift. It is the key factor for the unbeatable stability and reliability without frequent background measurement. Unlike in conventional transmission technique, interferometer instabilities do not show as large drifts in the photoacoustic spectra.
Applications
lLow sample volume applications:
Headspace analysis
Analysis of synthesis processes
Analysis of decomposition processes Outgassing of materials
lWet gases
lMeasurements requiring high dynamic range
Features
lPhotoacoustic detector with cantilever enhanced optical microphone
lVirtual zero-background measurement principle. Background drift of the FTIR instrument does not influence noticeably to the photoacoustic background.
lTotal gas volume of the system is low, approx. 30 ml
lA simple user interface with a display and buttons. The gas exchange procedure is user configurable. The gas exchange can be started manually with a press of a button or the instrument can be programmed to do it automatically using timer or an external trigger.
lThree gas connections in the front. The sample gas has two connections, one for input and one for output. The input is equipped with a particle filter. The purge input is for the IR beam path purging.
lTemperature stabilized gold coated gas cell with user selectable temperature from room temp. to 50 °C
lPatented ultra-sensitive optical microphone based on a MEMS cantilever sensor coupled with a laser interferometer to measure microscopic movement of the cantilever sensor.
lComplies with the following standards or other standardization documents under the Low Voltage Directive 2006/95/EC and EMC Directive 2004/108/EC: EN 613261:2005, EN 61010-1: 2001
l12 months warranty
Technical specifications
lMaterials in contact with gas:
FPM, FKM (o-ring seals, solenoid valve seals)
PS, EPDM (gas pump)
Resin (solenoid valves)
Stainless steel (solenoid valves, tube connectors)
IR-window (BaF2, KBr, etc.)
Readout window (SiO2)
Nickel (gas exchange unit block, tube connector)
PTFE (tubes, particle filters)
PP (particle filters)
lDimensions: 16,5 cm W x 29,0 cm H x 16,5 cm D (6,5 in W x 11,4 in H x 6,5 in D)
lWeight: 6,0 kg
lTotal internal gas volume: 30 ml
lOperational conditions:
Temperature range: 0 °C – +45 °C
Humidity range: Below 90% RH, non-condensing
Pressure range: Ambient level
Dust/water resistance: IP20 (IEC 529)
Shock/vibration endurance: Vibrations can affect the measurement results
Acoustical level: Loud sounds can affect to the measurement results
lStorage conditions: Temperature range: 0 °C - +60 °C
lSample gas conditions:
Temperature: Below the gas cell temperature and noncondensing
Pressure: 300 mbar – 1500 mbar
Moisture: Non-condensing at sample temperature
Gas flow with bypass flow: approx. 1 liters/minute
Particulates size < 1 μm
lGas connections: Push-in connector for 6/4 mm tubing
lElectrical connections:
Power supply unit:
Input voltage: 100 - 240 Vac, 50 - 60 Hz
Input power max: 30W
Analog outputs:
Output connectors: BNC
Output signal voltage span: ± 3.3 V
Output signal frequency band: Low pass filtered, 0-10kHz
Output load: >2k resistive
Trigger I/O:
CMOS compatible input
Open collector output
Triggering sequence programmable
lMeasurement specifications:
Detection limit: Gas dependent. Typically in the sub-ppm region.
Optical path length: 80 mm at optical axis
Repeatability: < 1 % of measured value in operational conditions at the calibration concentration
Temperature stability: Ambient temperature change within the operational temperature range will not cause drift Recommended FTIR scan speed: 0.16 cm/s or less (2.5 kHz HeNe frequency)
lFits to following FTIRs:
Bruker Tensor and Vertex series
Thermo Nicolet 6700/8700, Nexus series, iS10 and iS50
Perkin-Elmer Frontier, Spectrum One, Spectrum 100
Varian/Bio-Rad 3000/4000/6000/7000
Agilent/Varian 640/660/670/680
Jasco FT/IR-4000/6000
Shimadzu IRAffinity-1 /IRPrestige-21
Based on infrared photoacoustic spectroscopy technology, DKG-ONE Photoacoustic Gas Analyzer combines the unique light source and detector which is a patented enhanced cantilever beam optical microphone with ultra-high sensitivity. It can be widely applied
Transformer online monitoring and fault diagnosis technology is of great significance to improve the safety and stability of the power system.
DK-BSC 3001 series battery spontaneous combustion monitoring system from Duke Technology integrates ultraviolet absorption spectrum, infrared photoacoustic spectrum, cavity enhanced absorption spectrum, Fourier infrared spectrum, tunable semiconductor abs
Ventilation system is to monitor the concentration change of tracer gas to calculate the ventilation efficiency.
SF6 is widely used in GIS as a good insulation and interruption gas.
In oil or gas extraction processes, optimizing production methods is crucial. It is particularly important to accurately understand the flow rates, volumes, flow patterns, and cumulative trends of solid particles during extraction. The sand monitoring sys
The sand monitoring system from Duke integrates the measurement of fluid patterns, flow rate, instantaneous flow, and cumulative flow of sand. It is a low-cost, real-time monitoring system for predicting the flow patterns and cumulative trends of sand.
The sand monitoring system from Duke integrates the measurement of fluid patterns, flow rate, instantaneous flow, and cumulative flow of sand. It is a low-cost, real-time monitoring system for predicting the flow patterns and cumulative trends of sand.
When sand enters the wells or pipelines during the extraction process, it is essential to ensure the clear passage of the sand. Real-time monitoring of the flow rate, instantaneous flow, cumulative flow, erosion rate, and movement patterns of sand/solid p
The sand monitoring system from Duke integrates the measurement of fluid patterns, flow rate, instantaneous flow, and cumulative flow of sand. It is a low-cost, real-time monitoring system for predicting the flow patterns and cumulative trends of sand.
The Duke pigging indicator uses passive acoustic (ultrasonic) technology to sense the pig traveling through the pipeline, utilizing a built-in Lock Frequency Digital Signal Processor (LPDSP).
The DK-SA 830 Gas-Solid Separator operates on the principles of centrifugal sedimentation and density differences. When the fluid enters the separator tangentially at a certain pressure, it generates intense rotational motion.
Based on echo sensing technology, the Duke Non-intrusive acoustic pipe thickness monitor uses high-frequency sound waves generated by piezoelectric transducers to pass through materials.
The innovative DK-SA 850 downhole sand monitoring device features a new tool architecture, integrating advanced sensor design, signal processing technology, and analytical algorithms to accurately detect downhole sand ingress points and assess sand produc
DK-SA 860-S Series Vibration Sensor can connect to analog signal output of acceleration, speed, displacement sensors, can calculate speed and displacement data based on acceleration data, features include different sensor parameter settings, data acquisit
0.5 ppb detection limit: Utilising an ultra-sensitive patented optical cantilever microphone combined with a quantum cascade laser (QCL) light source, it can detect phosgene concentrations as low as 0.5 ppb, enabling precise identification of even minor l
Duke DK-F10L Photoacoustic Spectroscopy Greenhouse Gas Analyzer: The All-Around Expert for Precise Multi-Gas Monitoring
The Duke photoacoustic spectroscopy greenhouse gas analyzer
An All-Round Tool for Catalytic Research
Infrared Photoacoustic Spectroscopy Gas Analyser
